Go to Top

VA-2000

VA-2000 series actuator is electromechanical product, and can be mounted on VB-2000 series valves.VA-2000 series actuator has 3 basic types:

  • VA-2100 reversible motor operation and provide increasing control;
  • VA-2101 can accept input 0(2)~10V DC or 4~20mA DC control signal and provide proportional control, and also can provide 0~10V DC feedback signal to indicate the position of the actuator;
  • VA-2102 can accept input 0(2)~10V DC or 4~20mA DC control signal and provide proportional control.

Product Feature

  • Low AC voltage synchronic reversible motor.
  • Magnetism clutch.
  • The action uses gear to transit. Output gear rollers are supported by surface rolling bearing, which rotate around the central bearing.
  • Valve working position indicator.
  • Fireproof ABS plastic casing. Conveniently mounting.
  • 0(2)~10V DC or 4~20mA DC control (For VA-2101 and VA-2102 only)
  • Working state (DA or RA) can be selected by jumper.
  • Apply to 13mm, 15mm, 17mm or 19mm stroke can be selected by jumper.
  • Have overtime protection function, and failure protection function when without control signal.
  • Have 0~10V DC feedback signal.
  • Have manual open/close valve function (only for VA-2XXXM) z Have auxiliary micro-switch (only for VA-2XXXS)
  • Have manual open/close valve function and auxiliary micro-switch (only for VA-2XXXK)

Technical Data

MODEL VA-2100X* VA-2101X* VA-2102X*
MOTOR Bi-directional Synchronous motor with magnetic clutch.
POWER FOR MOTOR 24VAC±10%, 50/60Hz, 2.5VA
220/230VAC±10%, 50/60Hz,
5VA˄Please indicate in order˅
24VAC±10%, 50 / 60Hz, 2.5VA
OPERATION/CONTROL Reversible & increasing control Proportional control, direct or reversible
Maximum Close-off Pressure 600kpa
ELECTRICAL CIRCUIT Power: 24V AC±10%,
50/60Hz,
Input signal range: 0(2)~10Vdc (input impedance: 1Mȍ)
or
0(4)~20mA dc (input impedance:500ȍ)
Feedback signal: 0~10V DC(1mA)
Power: 24V AC±10%,
50/60Hz;
Input signal range: 0(2)~10Vdc
(input impedance: 1Mȍ)
or
0(4)~20mA dc (input impedance:500ȍ)
POWER CONSUMPTION OF PCB 2VA
FORCE 500N
MATERIAL GEAR: POM plastic
REDUCER DOWN PANEL: Zinc-plated steel
BRACKET: Die-casting aluminum alloyed
CASING: Fire-proof ABS engineering plastic (UL94V-0)
OPERATION TIME 50Hz: 12.4s/mm; 60Hz: 10.3s/mm
ROOM TEMP. OPERATION 2~55ć
STORAGE -20~65ć
MAX. RH <90% no condensation
CONNECTING WIRES 0.5~1 mm2
EX-FACTORY SETTING Move upwards to fully-close position Stroke: 19mm; Input signal: 0(2)~10V DC; Working mode:
DA; Failure protection
UP; Move upwards to fully-close position
ACCESSORIES U-type connector, lock nut, indicator guide, valve connector
NET WEIGHT 0.82kg 0.87kg

Note: The “X” with “*” is additional code: M-with manual open/close function; S-with auxiliary micro-switch; K-with manual open/close function and auxiliary micro-switch; omitted-standard type.

Make a demand
Submit a Request
Become a Distributor
Hide Buttons